The American Standard Americast Bathtub

American Standard's Americast bathtub is made of a durable lightweight alternative to cast iron. The material called Americast is exclusively manufactured by American Standard. Americast bathtubs are half the weight of its cast iron counterparts; yet have the same structural thickness. The rich enamel colors provide excellent heat retention.

The Americast tubs were seven years of research and testing in the making. In 1988, Americast was introduced to the public. The unique three-layer construction consists of a smooth porcelain-enamel finish bound to high-quality alloy that is backed by an injection-molded structure. The backing structure material helps protect the porcelain finish from chipping and crazing. The composition of these tubs allowed for a deeper more usable bathing space.


American Std began marketing with the Princeton model. It is now available in six models and continues to be popular. Features such as a Luxury Ledge for holding toiletries has been added to the original design. The installation flexibility of the bathtub has been unsurpassed. The company's plant in Salem, OH handles all manufacturing of the Americast tubs.

The American Standard Americast Bathtub

Installation of your American Standard Americast bathtub can be handled by yourself if you are comfortable or the contractor of your choice may perform the task. The bathtub may be shipped to your door in some situations. There are currently three different models available. These are:

o The Stratford features a glossy porcelain finish and full slip resistant surface. This model is available in the colors Arctic, Linen, Silver, Bone, Fawn Beige and White. This bathtub is available in a whirlpool model.

o The Princeton features a glossy porcelain finish, slip resistant surface, beveled headrest and built in lumbar support. This classic Americast bathtub has an innovative Luxury Ledge for toiletries. Colors available in this model are Bone, White, Fawn Beige, Black, Linen, and Silver.

o The Cambridge model is a five foot bathtub. Due to it's rugged construction, several commercial institutions around the globe use this American Standard bathtub. This model is available in the same colors as the Princeton. A whirlpool can be added to this bathtub if you desire.

American Standard Americast Bathtub's have easy cleaning recommendations and care instructions. Using a non-abrasive cleaner such as powdered Bon Ami, Spic 'N Spam, didi seven or ZUD on stains; wet and wipe off the surface. A scouring pad or other abrasive material should not be used.

All American Standard Americast bathtubs feature a "Stan-Sure" slip resistant enamel surface. This finish is obtained by mixing porcelain and hard quartz to produce a safer surface. This built in safety feature can reduce the need for mildew and bacteria harboring mats and unsightly tapes in the bottom of your bathtub. Please note that soap and body oils may accumulate on surfaces, therefore routine cleaning and maintenance is recommended to protect you and your American Standard bathtub.

American Standard Americast bathtubs come with a limited lifetime warranty to allow you to make your purchase with confidence.

The American Standard Americast Bathtub

Need more advice on Americast Bathtubs? Visit our website at to find expert advice, reviews and great information on a range of bathroom products, including the amazing Freestanding bathtubs

Tips For Replacing Your Bathtub Drain

Bathtub drains occasionally need to be replaced, and drains with the built in stoppers are the ones that usually have problems. These will with time become harder to use and will slowly allow water to leak while the tub is supposed to be plugged, as well as hold water when they are supposed to drain. These are the reasons that you cannot properly rinse off your ankles in the shower in many cases. In time your bathtub drain stopper mechanism will need to be repaired or replaced. This is actually a minor repair that most do-it-yourselfers are willing and able to tackle. You will need to have on hand some plumber's putty, channel locks (or other wrench), a Philips screwdriver, and the replacement part for the bathtub drain you are replacing as well as a few cleaning rags.

Start by removing the old bathtub drain plug mechanism. This has a face plate in the tub which has two screws attaching it to the tub. Once you remove the cover plate you will gain access to the rest of the assembly. Simply grasp it and remove through the hole it was installed in.


If you have any broken pieces you have a couple choices; if you have access to the other side of the wall the easiest thing to do is open the wet wall panel and make the repair in the open space but this is usually not an option. The most likely scenario is you are going to have to fish out the parts in a very small amount of space. A piece of wire, or a wire hanger, straightened into a hook works well.

Tips For Replacing Your Bathtub Drain

Once you have fished out all of the old pieces you merely need to clean up, and reassemble and reinstall the pieces. Often you can repair this type of draining mechanism without having to replace any of the parts by simply cleaning it up and putting it back together correctly.

For those drains that do need to be replaced you need make sure your new parts are the same as the old parts were. Changing to different sized parts when you are working with plumbing is not a good idea, unless you like having your home flooded.

Test the parts, make sure everything is in good working order. If the stopper fits in and plugs the pipe properly you are ready to install the bathtub drain stopper. If not you need to get the right equipment first.

Plumbers putty should be used on all of the pipes and flanges where they attach to one another to make sure they seal well. The mechanism that lifts and lowers the stopper needs to be attached to the overflow plate. Before you seal the plate down make sure the stopper is working properly by testing it. If the tub is holding water and draining the water back out at appropriate times you are ready to seal the plate down.

You need to smear some plumbers putty on the plate and then put it in place and screw it down. You can then clean up any excess plumber's putty. Make sure that you haven't covered the overflow vent and you are finished. Your bathtub drain should work as good as new.

Tips For Replacing Your Bathtub Drain

Visit us for more information on how to refinish a bathtub [], how to caulk bathtub tips and Japanese bath tubs.

How To Install A Bath Tub Yourself

Installing a bath tub can be a difficult endeavor, but with the appropriate tools and knowledge of what to do it can be successfully completed. It's a good idea to consider other options before deciding to install a new tub. An existing bath tub can be updated and improved by having it re-glazed, or by having a fitted liner created and installed. These options can decrease the cost and length of time involved in replacing a bath tub.

If you've decided that installing a brand new bathtub is the only option, you must carefully research the best method of installation for the tub you choose and your bathroom. If you have the appropriate plumbing and construction knowledge, or know someone who does, the first step is to assemble the necessary tools for the job.


A bath tub installation will require some basic tools that you will most likely already own, such as a hacksaw, drill, hammer, level, nails, screws and tape measure. Other parts and tools may have to be purchased for the job, such as a tube cutter, propane torch, PVC pipes, plastic shims and, of course, your new bath tub. Safety equipment, such as goggles, should always be worn whenever necessary during the project.

How To Install A Bath Tub Yourself

When installing a tub to replace an existing unit, the old bath tub needs to be disconnected and removed. It's best to choose a similar size and style of tub, so no additional framing or alteration of original water supply lines needs to be performed.

Using as much assistance as is necessary, place the new bath tub into place and use shims to level it. Support boards should be present under the rim of the tub to help support its weight. After the tub is leveled and is adequately supported, the next focus is to connect the necessary plumbing.

The steps needed to connect the plumbing will depend on what is already present from the previous tub. The drainpipe may have to be cut to fit, so that it connects to the trap, which should be centered below it. Reconnect all of the plumbing fixtures in the same manner as the previous tub was disconnected.

After turning on the water and testing the entire system, it may need to be inspected, depending on building code regulations. After completing any necessary inspections, the final faucets and handles can be connected and the surrounding walls can be refinished and caulked.

Although the process of bathtub installation can be complicated, once you learn how to install a bath tub, you can save a great deal of money by completing the task yourself. If you have the right tools and supplies available, along with some assistance to move the tub, the entire process can be completed in as little as a day.

How To Install A Bath Tub Yourself

Visit us for more information on bathroom accessory guide [], bathroom accessories [] and how to install a bath tub []